There are a variety of wastes that may be generated in ¶¶Òõ̽̽ labs. Examples of chemical waste include the following:
The more chemicals combined into one waste container, the more challenging (more hazardous) and expensive the waste can be to dispose of properly. The information below is designed to assist you in disposing of your lab waste properly. Ìý
Anyone who generates lab waste should complete the online .ÌýContact your lab safety coordinator if you have any questions about how to combine or collect lab wastes for safe disposal.Ìý
When are waste pickups?
On campus locations: Waste technicians pick up tagged waste containers 2x a week on main campus.
Off-campus locations: Waste generated at off-campus buildings (e.g.Colchester Research Facility, Rubenstein Labs, Proctor Maple Research Facility, ¶¶Òõ̽̽ Horticulture Education and Research Center, Morgan Horse Farm, etc.) is picked up on the 1st and 3rd Thursdays of each month.Ìý
Before you begin collecting lab waste, contact yourÌýlab safety coordinatorÌýso they can recommend a safe waste collection protocol. Then, review the section below called Waste Container Choice. ÌýUnderstanding how to collect waste properly reduces the hazards for ¶¶Òõ̽̽ waste technicians who handle and manage your lab waste. ÌýFor example, combining more than one chemical inside one waste container can often make it more difficult to safely manage and dispose of the waste and increases the disposal cost. Be careful if you re-use containers in the lab to collect wastes; the waste must be compatible with whatever the original container held.
Lab Waste Accumulation
Lab wastes generallyÌýaccumulate over a period of time. These wastes must be labeled with a yellow Laboratory Waste Accumulation label the minute one drop is poured into the waste container. This is specified in ¶¶Òõ̽̽'s Lab Safety Program and is clearly mentioned on the monthly Lab Self-Inspection Checklist.
It is critical to complete all of the blanks on the Lab Waste Accumulation Label to ensure that laboratory personnel, EHS staff, custodians, Physical Plant personnel, and emergency responders can identify the contents of any lab container. Waste accumulation labels and laboratory waste tags are available from several locations on campus.
Lab waste labeling at ¶¶Òõ̽̽ is a two-part procedure:
Once you enter a lab waste tag online, it notifies our waste technicians that you have waste ready for pickup. Be sure to hang or tape the waste tag to the container itself.Ìý
NOTE: Lab waste containers do not get returned to the lab.
View supporting diagrams (waste accumulation label)
If you are not following this procedure, it may cause an accident and your lab and waste are out of compliance with ¶¶Òõ̽̽'s Laboratory Safety Program.Ìý Please review the details about this procedure below.Ìý
Before collecting chemical waste, consult with your EHS Lab Safety Coordinator by emailing safety@uvm.edu.ÌýCoordinators can help you plan and make recommendations for proper waste collection. This helps EHS to stay safe and more easily manage it!
Things to consider before collecting lab waste:
You must list the estimated or exact percentages of the chemicals in your waste on the waste accumulation label and on the laboratory waste tag. ÌýIt is required that you list exact percentages for the following chemicals:
These chemicals are regulated differently at different concentrations. Some can also be more reactive at a higher concentration.Ìý
Ìý
Most lab chemical solutions cannot go down the lab drain. Anything poured down a ¶¶Òõ̽̽ drain goes directly to Burlington's wastewater treatment facility and eventually discharge into Lake Champlain. To protect this area resource, and per EPA and Burlington Public Works Department requirements, lab personnel are prohibited from drain disposing of the following materials:
Only materials that have been approved for sink disposal by EHS Compliance Manager may go down the drain at ¶¶Òõ̽̽. Many non-hazardous salt and sugar solutions have been approved for drain disposal, but please err on the side of caution.Ìý
Small amounts of chemical solutions should be tagged as lab waste. Only submit an online if you are generating a large amount of a solution that you believe is non-hazardous but is not yet on the approved sink disposal list. Indicate 100% of the constituents in the solution, even if the solvent is water.
Ìý
Collect solvents used to clean glassware
Solvents used to rinse clean glassware (acetone, ethanol, Nochromix, etc) are required to be collected as hazardous waste and disposed of through ¶¶Òõ̽̽'s waste disposal procedures. These materials are regulated and cannot go down the drain.
Ìý
Evaporation of hazardous materials inside of a chemical fume hood for the purpose of disposal is prohibited.
Chemical fume hoods are used to keep chemical vapors from the user's breathing zone during experimental processes. A fume hood can also increase the evaporation rate of of certain chemicals due to the amount of airflow. ÌýTo minimize the potential for air pollution as a result of chemical fume hood, close caps tightly when a chemical is not in use, and never store chemicals, including chemical wastes, inside of the the fume hood. ÌýClutter and extra materials stored on the fume hood work surface prevents the proper movement of airflow in the hood.
There are many steps in determining the appropriate waste container. The following information is to help guide you in your selection.
Ìý
Improperly choosing a waste container can increase the risk of the waste container degrading, leaking, or building up unnecessary pressure, leading to a potential lab injury.
The container material, type of cap, and size of the container matters. Consider the following when choosing the proper waste container.Ìý
Email safety staff if you are unsure about how to collect waste in your area.
Pay attention to manufacturer containers. If hydrochloric acid was originally shipped from a manufacturer or distributor in a glass container (or a glass container coated with plastic), then a glass waste container might be the safest choice!
30% Hydrogen Peroxide:Ìý30% hydrogen peroxide solutions are shipped in a container with a vented cap. Be sure to purchase and store waste solutions of this same type in a waste container with a pressure-relieving (venting) cap.
Ìý
Think about how much waste you will generate within a specific time frame.Ìý
e.g. If you estimate that you will generate 1 G of a specific waste stream over a one year period of time, Ìýa 1 G waste container may be too large because lab waste can't be more than 6 months old before it is required to be picked up for disposal. If you estimate that a procedure will generate 500 mL of waste in one week, and you have hundreds of samples to run, a larger waste container may be a better choice.
Safety staff are always available to help make these kinds of waste descisions.
Ìý
Do...
Do NOT
View supporting diagrams (waste container choices)
Ìý
If you re-use a stock chemical container to collect waste, be sure that
Clearly label any reused containers as "EMPTY" and de-face the original labels until you start using them.
Safety Tip:
Ìý
Any empty chemical container that held highly hazardous or reactive material, such as sodium azide, osmium tetroxide or cyanides, is required to be tagged for waste disposal (see list of acutely hazardous chemicals).
Ìý
¶¶Òõ̽̽ ChemsourceÌýsells 1 G amber glass waste containers and 5 G (20 liters) plastic containers for liquid or solid waste collection. While most waste containers cannot be returned to users the 5 G waste containers are replaced during pickup. Customers pay for the initial 5 G waste container, and they are swapped out at no additional charge.
Labs that need to collect lab waste in volumes larger than 5 gallons (20-liters) should contact Safety staff before doing so.
If your lab needs smaller waste containers, please contact a contracted ¶¶Òõ̽̽ preferred vendor, such a VWR or Thermo-Fischer Scientific, to purchase the appropriate size waste containers for your needs.
The yellow Lab Waste Accumulation label must be filled out completely as soon as any waste is added to the container. As part of the required ¶¶Òõ̽̽ monthly laboratory self-inspection, visibly inspect waste containers and their labels. If the information written on a waste label is unreadable (has faded over time or chemicals have dripped on to the label), replace it. A properly filled out laboratory waste accumulation label includes the following:
Waste container labels MUST be visible and readable at all times.
Ìý
Double labeling causes confusion. Never place an orange or green label AND a yellow waste accumulation label on the same container. Only use one or the other. If a label is still visible after placing a waste accumulation label, make sure to fully de-face the one that is no longer useful.
Waste accumulation container labels and laboratory waste tags are available from several locations on campus or by contacting safety@uvm.edu.
Ìý
Store chemical waste by hazard with other compatible chemicals in a properly labeled chemical storage cabinet. Never store waste in a chemical fume hood unless odors are being emitted (e.g. phenol, chloroform).
Cabinets used for multiple waste containers that are labeled "Chemical Waste Storage Area" must have smaller secondary containment bins inside to separate incompatible chemicals. Please see the Chemical Storage Guide.
Ìý
Leave 2 inches of empty space at the top of waste containers - never overfill.
Waste containers must be inspected at least monthly, per the self inspection checklist, to assure that no degradation of the container or its contents has occurred.
A leaking container must be either packed in a secondary container, or its contents transferred to another container.
For items that are not identified specifically as chemical, biological, or radioactive waste, refer to the for details about how other items (e.g. batteries, light bulbs, and old lab equipment) are collected on campus.
Ìý
"Unknowns" are chemicals that are found in the lab either with an illegible label or no label at all that lab workers no longer know the contents. We cannot guess at what these wastes are. There is a strict and expensive protocol that Safety staff are required to follow in order to manage this type of waste. Please inspect your chemicals monthly as required by the Lab Safety Program to eliminate or minimize unknown chemicals in your lab.
If you find an unknown in your lab, please tag it for pickup with as much information as possible. If you have multiple unknowns, each container needs individual tags.
Ìý
Batteries are generally collected throughout campus in brown battery buckets. If you have a bag of batteries in your lab, this can be tagged as waste for pickup. Please estimate the amount in pounds.
NOTE: Large lead acid batteries, or any battery that is swollen and/or leaking, should be tagged immediately for disposal.
Ìý
Biologically contaminated sharps also contaminated with the residues of hazardous chemicals can be managed in the same red, puncture-proof container as all other sharps in the lab. There is NO need to manage these as a separate waste stream. Please do not label the container with a lab waste accumulation sticker.Ìý Seal, lock, and place full sharps box inside of a biohazard box when full.
If you do not have a biobox, sharps, and their containers, can be handled like other chemical wastes. Use an accumulation label to identify the residues (e.g. solvents, etc.) that contaminate the sharps. Once full, tag for waste pickup.
Ìý
Containers of highly hazardous or reactive chemicals are required to be securely closed and tagged for waste disposal. Never re-use these types of containers to collect waste.
Ìý
Debris that is contaminated with hazardous chemicals should be collected in a clear bag or in a cardboard box lined with a clear plastic bag and tagged as chemical waste for disposal. Never use a red biohazard bag to collect chemically contaminated glassware or debris.
Glassware contaminated with infectious material should be placed in a puncture-proof container and then placed in a biohazard box. For information about biological waste please follow this link to the biowaste management.
Glassware contaminated with radioactive contaminants should be decontaminated and Radiation Safety staff should be notified. For information pertaining to radioactive waste management follow this link to the Radiation Safety Office (RSO) website.
Ìý
Burned out fluorescent lights, compact light bulbs, UV light bulbs, etc. are considered Universal Waste in the State of Vermont and should be removed from the fixture and carefully placed back inside of the cardboard box that they came in to prevent breakage. Email safety@uvm.edu, call 802-656-5408, or submit a waste tag for intact light bulb pickup.
Broken light bulbs are considered hazardous waste and should be collected in a clear bag that can be sealed inside of a cardboard box. Fill out a lab waste tag and enter tag online for pickup.
Ìý
Since the management and disposal of mixed wastes is more complex and costly, please contact safety@uvm.edu before you generate any mixed lab waste such as the combination wastes described below. Ìý
Mixed waste combinations should only be collected with prior approval.Ìý
Ìý
Old lab equipment needs to be checked by ¶¶Òõ̽̽ ITSto have hazardous components removed prior to safe disposal as scrap metal or electronic-waste. Labs are required to use the Surplus Disposal Form for any equipment to be disposed appropriately.
Ìý
Used oil, and oil-contaminated rags/debris, is regulated in Vermont. This means the oil and debris must be collected, labeled, and disposed as hazardous waste. Here are a couple examples:
Once a waste container is full OR the date on the container is approaching the 6 month time frame, fill out a white muti-part Laboratory Waste Tag. List all chemical contents in English (no formulas) and estimated percentages.
Waste tags are uniquely numbered. NEVER MAKE UP A TAG NUMBER. After manually filling out a waste tag,
Make sure to keep wastes in segregated secondary containers. Do not store waste in a chemical fume hood unless odors are being emitted.
Ìý
5-gallons of any chemical waste must be collected in a DOT-approved container. ¶¶Òõ̽̽ Chemsource sells DOT-approved containers for liquid waste or solid (debris) waste (with an open top lid) for this reason. ÌýPlease order the first 5 gal containerfrom Chemsource and then we will replace it each time we pick up your waste (at no charge).
Never tag multiple 5-gallon containers on one lab waste tag.
Smaller waste containers: ÌýIf you have identical chemical waste solutions in several containers smaller than 5-gallons, you may complete one lab waste tag for the group. In the "Amount" section of the waste tag, enter the TOTAL amount of liquid inside all of the containers, and don't forget to include the number of containers.
Chemical spills of one liter or less can be cleaned up by lab personnel using the Chemical Spill Kit that is provided by Risk Management & Safety to every lab on campus.Ìý
Debris, such as contaminated gloves, cardboard, bench pads, glassware, etc should be collected in a CLEAR plastic bag and tagged immediately with a . Safety staff are always available to consult with lab personnel about a spill or to assist or perform the spill cleanup. Page Safety staff by calling ¶¶Òõ̽̽ Service Operations at 802-656-2560, press 1 to speak to dispatcher.
One of the annual tasks on the self-inspection checklist is to review lab chemicals and relabel or purge as appropriate.Ìý
If a lab has more than 15 or 20 waste containers ready for disposal at one time, please contact Safety staff so we can assist with the proper segregation, tagging, and disposal of the waste. In these cases, each container need NOT be tagged individually. Please meet with your Laboratory Safety Coordinator before conducting any chemical cleanout.
Ìý
When renovating, relocating, or closing a lab at ¶¶Òõ̽̽, it is the responsibility of the Lab Supervisor to make sure that the lab is decommissioned properly. A Laboratory Clearance Checklist must be completed. For more information, please review ¶¶Òõ̽̽'s Lab Clearance Procedure.
For any lab group that is looking to dispose of a large number of research samples with similar hazards, completing a Research Sample Disposal Form may be the simplest way to complete this task. Complete one form for each set of samples that have different hazards, characteristics, and states.
Fill out the form completely before tagging the form under one waste tag. Make sure all of the information is accurate and that you have included a good contact person to answer any questions that may arise during or after pick up. For the "yes" or "no" questions, make sure to explain the reasoning behind any "yes" answers.
For instance: "Is the material an oxidizer risk?" If "yes," explain the cause for the potential oxidation. Writing as much information as possible will make it easier to dispose of the materials appropriately.
Unknown chemicals present serious safety and compliance issues. An "unknown" is defined as a chemical in an unlabeled container for which the identity is unknown. Federal, state, and local regulations specifically prohibit the transportation, storage, or disposal of wastes of unknown identity. Unknowns can be dangerous for lab personnel and anyone who has to manage the material for disposal after it leaves the lab. Hazardous waste disposal companies will not accept unknowns without analysis. Never open or handle an unknown in your lab if the container is bloated or you suspect that it may react adversely or even detonate. Contact Risk Management & Safety immediately.
Unknown Testing is Required before Disposal
The process for identifying an unknown chemical is dictated by the end-disposal company who contracts with ¶¶Òõ̽̽ to receive and manage the final destruction of the waste. Risk Management & Safety manages this tedious and expensive process. In 2021, ¶¶Òõ̽̽ labs generated about 30 unknowns!
Unknown chemicals must be tested for several properties before they can be identified as what they are not. Yes, you heard that correctly! A specific testing criteria helps RM&S determine the hazard class (corrosive, ignitable, oxidizer, reactive, toxic, and radioactive) before proper waste management and disposal can take place. For this reason, every effort should be made by laboratory personnel to prevent and identify unknown chemicals, but never guess when it comes to unknowns. Never open, sniff, taste, or try to react an unknown to make an identification. Avoid consolidate multiple unknowns into one container.
If you have any information that can help narrow down the possibilities, please let us know!
Prevent Creating Unknowns in Your Lab
Before students graduate and move on, help them properly label and dispose of their samples before they leave ¶¶Òõ̽̽. If a lab is closing or a PI is retiring or leaving ¶¶Òõ̽̽, contact RM&S 2-3 weeks beforehand to meet in the lab and review all leftover materials.
One Waste Tag per Unknown Container
If you are unable to identify the unknown chemical, it must be tagged with its own individual lab waste tag. The description of the unknown should include the word "Unknown" and a general description (color, liquid or solid, etc). Refer to the image on this page to better understand how to complete a lab waste tag for each unknown material.
NOTE: Unknowns are picked up from campus labs 1x per month to accommodate the time it takes to conduct lengthy testing and to categorize and pack the waste safely for proper disposal.
EHS waste technicians pick up laboratory waste 2x per week on main campus from most lab buildings. Below are the exceptions:
Discovery Building - picked up only on Fridays.
Off Campus Buildings: Ìý2nd & 4th Thirsday of each month
For other pick up times, e.g. before breaks, shortened weeks, etc., notifications will be sent to lab personnel in SciShield.
Waste accumulation container labels and laboratory waste tags are available from several locations on campus or by contacting safety@uvm.edu.